ENGLISH
WIDE LCD PANEL TV
INSTRUCTIONS
Contents
PREPARATION
Safety precautions............................... 2
Remote control buttons and functions... 3
Set up and connections....................... 4
Initial settings....................................... 6
Registering / Editing channels............. 6
FUNCTIONS
Picture setting...................................... 7
Sound setting ...................................... 9
Useful functions................................. 10
Viewing Teletext................................. 12
Watching Video or DVDs................... 12
Configuring your remote control........ 13
REFERENCE
Troubleshooting................................. 15
Technical information......................... 16
CH/CC List......................................... 18
Specification...................................... 19
LT-32Z49
LT-42Z49
GGT0312-002A-H
Remote control buttons and functions
Turn the TV on from standby
Display on-screen menu
Operate the menu
“AAA/R03” Batteries
• Insert the batteries
Use two “AAA/R03” dry cell batteries. Insert the
batteries from the · end, making sure the ·
and ª polarities are correct.
To previous screen
WARNING:
If this symbol is shown,
Batteries shall not be exposed
it is only valid in the
Turn on “Clear SD”
to excessive heat such as direct
European Union.
sunshine, fire or the like.
Colour button
Switch between “TV, STB, BD/DVD, AUDIO”
Select TV or Video input
Channel information,
Turn the Volume off/on
Adjust the volume, Turn off muting
Turn on “Sound Meister”
Change channel/page
To Teletext
Turn the on-screen guide off / on. (While on-screen menu is displayed)
Change the aspect ratio (P. 8)
:OOM
V-Scroll
1. Select
!UTO
0ANORAMIC
2EGULAR
16:9 Zoom
0ANORAMIC
ꢀꢁꢂꢃ :OOM
ꢀꢄꢂꢃ :OOM
ꢀꢄꢂꢃ :OOM 3UBTITLE
&ULL
Move the picture with 5 or ∞
while this bar is displayed.
2. Set
Functions for viewing Teletext
Turn on “Eco Sensor”
To operate your other devices
Channel selection
Select the desired channel number.
For Hyper Scan
PR changes without changing the picture. Once you
stop pressing CHANNEL+ or CHANNEL - button,
picture will change to the desired PR.
Favourite channel setting. (P. 11)
1. Register the favourite channel
Press and hold
Press number
button (1-4 only)
RETURN PLUS function
Return to the frequently viewed channel.
Set 1-4 ?
Press and hold
Return Plus
Programmed!
Choose the channel
you want to
programme
will be displayed.
Programmed!
Press and hold
2. Recall the favourite channel
To cancel
Return Plus
Canceled!
Press number
button (1-4 only)
Favourite 1-4 ?
Press and hold
Press
RETURN function
If you have not set or have cancelled the RETURN PLUS channel,
this will return to the previously viewed channel.
• If the favourite channel has not been registered then
“No Memory” will be displayed.
3
Set up and connections
Connect an aerial and VCR / DVD Player
Switch between TV / VIDEO
devices
Display on-screen menu / set
TV/VIDEO
MENU/OK
AERIAL
6)$%/ꢅꢆ
2
,
6
Change channel / Page /
Hyper Scan Function (P. 3)
CHANNEL
Power lamp
ON : Lit (Blue)
OFF: Unlit
Volume / Adjust
Power On / Off
VOLUME
Power lamp lights
while the TV is on.
• “Power Lamp” (P. 11)
Remote control
sensor / Eco Sensor
To Headphone (P. 5)
OR
Care when setting
■ Power requirements
•
■ When attaching the TV to the wall, use the optional JVC wall
Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
VCR (DVD Player)
• After all the connections have been made, insert the plug into an
AC outlet.
mounting unit
Consult a qualified technician.
JVC assumes no responsibility for damage due to improper mounting.
LT-32Z49 : 200 mm x 200 mm mount which conforms to VESA standards.
LT-42Z49 : 400 mm x 200 mm mount which conforms to VESA standards.
•
•
•
•
Stand Assembly
- Insert the stand into the panel at the position where the screw
holes are, and fasten the screws.
■ Installation requirements
•
To avoid overheating, ensure the unit has ample room.
ꢀ
ꢆ
•
To prevent the TV from falling, thread
the belt through the hole on the back of
the stand and secure it to the TV rack.
200mm
Hole for belt
(under the stand)
Screw for attach
the belt to the
stand (provided)
- If you have any problem with assembly, please contact a retailer or
a dealership.
Note: 4 screws included.
150mm 50mm
150mm
50mm
Screw (not provided)
Belt (provided)
4
Set up and connections (continued)
You can connect many different devices to the rear panel of the TV.
Please read the user manuals of each device before setup.
(Connecting cables are not supplied with this TV.)
VIDEO-1 Watching videos
Output
Input
HDMITM Connector.
•
Composite signal /
Component signal
(P. 16)
•
Sound L / R
• Use Component signal
“Video - 1 Setting” (P. 12)
HDMI-1
HDMI-2
HDMI-3
Headphones
DIGITAL VIDEO/AUDIO
VIDEO-2 Watching videos
To “HDMI-1”
To “HDMI-3”
Output
Input
• Composite signal
• Sound L / R
HD Video camera
To “HDMI-2”
DVD player
(HDMI compatible)
Component input
Composite input
HDMI-1
HDMI-2 Connecting HDMI devices
HDMI-3
DVD player
(HDMI compatible)
L
L
R
V
R
V
VIDEO-1
VIDEO-1
VCR / DVD recoder
Pr
Pb
Y
Pr
Pb
Y
Output
Input
Amplifier
• HDMI signal (P. 19)
(L)
(R)
Game
Video
• “HDMI Setting” (P. 12)
• HDMI-2 and HDMI-3 inputs do not
support analogue sound.
• Connect a “DVI” device to
“HDMI-1” (P. 16)
• Please use a High Speed HDMITM
Cable. High Speed HDMITM Cables
are tested to carry an HD signal up
to 1080p and higher.
R
L
V
V
OUTPUT
VIDEO-1
L
L
R
VCR
To Video-2
DVD Player
R
Pr
Pb
Y
Game consoles Video camera
HDMI-1
VIDEO-2
PC
R
L
V
( DVI ANALOG AUDIO )
PC input line in
OUTPUT
PC AUDIO
PC
Video and sound signal of a TV
channel you are viewing outputs
from this terminal
PC IN
(D-SUB)
Output
• Composite signal
• Sound L / R
• Check for PC compatibility.
“PC signals that can be displayed” (P. 16)
5
Initial Settings
Registering / Editing channels
You can edit the channel list or register new channel manually.
Display the
menu bar
Select
“Set Up”
Select
“Edit / Manual”
1. Select
Turn on the TV
1
• Show only when powering on
for the first time.
• The power on the unit can
also be used.
ꢇ
%DIT
)$
1. Select
Select a
channel
02
ꢊꢀ
ꢊꢆ
ꢊꢈ
ꢊꢁ
ꢊꢉ
ꢊꢄ
ꢊꢌ
ꢊꢍ
ꢊꢃ
ꢀꢊ
#(ꢎ##
#( ꢊꢆ
#( ꢊꢈ
#( ꢊꢌ
#( ꢌꢄ
#( ꢀꢆ
#( ꢊꢃ
#( ꢊꢉ
#( ꢊꢆ
#( ꢀꢉ
#( ꢆꢍ
2. Next
2. Next
JVC logo appears
Select a language
Move
Move a channel position
2
3
1. Start
ꢇ
%DIT
)$
ꢇ
1. Select
2. Set
,ANGUAGE
02
ꢊꢀ
ꢊꢆ
ꢊꢈ
ꢊꢁ
ꢊꢉ
ꢊꢄ
ꢊꢌ
ꢊꢍ
ꢊꢃ
ꢀꢊ
#(ꢎ##
#( ꢊꢆ
#( ꢊꢈ
#( ꢊꢌ
#( ꢌꢄ
#( ꢀꢆ
#( ꢊꢃ
#( ꢊꢉ
#( ꢊꢆ
#( ꢀꢉ
#( ꢆꢍ
%NGLISH
®ÅËAšÈÌ×ÅA
#ASTELLANO
-ELAYU
&RANÎAIS
0YCCÅÃÄ
2. Move
ไทย
Finish
Tieáng Vieät
Edit a channel name
ꢇ
ID
Select the Teletext language group
%DIT
1. Select character
2. Move position
02
ꢊꢀ
ꢊꢆ
ꢊꢈ
ꢊꢁ
ꢊꢉ
ꢊꢄ
ꢊꢌ
ꢊꢍ
ꢊꢃ
ꢀꢊ
)$
#(ꢎ##
#( ꢊꢆ
#( ꢊꢈ
#( ꢊꢌ
#( ꢌꢄ
#( ꢀꢆ
#( ꢊꢃ
#( ꢊꢉ
#( ꢊꢆ
#( ꢀꢉ
#( ꢆꢍ
(Red)
ꢇ
4ELETEXT ,ANGUAGE
Select
!
'ROUPꢅꢀ
'ROUPꢅꢆ
'ROUPꢅꢈ
'ROUPꢅꢁ
'ROUPꢅꢉ
'ROUPꢅꢄ
! " # $ %
&
3. Set
Insert / Delete a channel
Insert/Delete
• See “Language group for Teletext” (P. 16)
Automatically register channels (Auto Program)
1. Select a 2. Enter a
ꢇ
%DIT
02
ꢊꢀ
ꢊꢆ
ꢊꢈ
ꢊꢁ
ꢊꢉ
ꢊꢄ
ꢊꢌ
ꢊꢍ
ꢊꢃ
ꢀꢊ
)$
#(ꢎ##
#( ꢊꢆ
#( ꢊꢈ
number 0-9
CH/CC
(Green)
4
5
button, then
receives the
broadcast
signal.
#(
ꢏꢏ
! " # $ % &
#( ꢌꢄ
ꢇ
#( ꢀꢆ
#( ꢊꢃ
#( ꢊꢉ
#( ꢊꢆ
#( ꢀꢉ
#( ꢆꢍ
!UTO 0ROGRAM
#( ꢊꢃ
ꢀꢆꢋ
(Yellow)
• Delete a channel by press
button.
• “CH/CC List” (P. 18)
Register a new channel
ꢇ
Manual
Check what was registered
-ANUAL
1. Beginning channel search
(Red)
02
ꢊꢀ
ꢊꢆ
ꢊꢈ
ꢊꢁ
ꢊꢉ
ꢊꢄ
ꢊꢌ
ꢊꢍ
ꢊꢃ
ꢀꢊ
)$
#(ꢎ##
#( ꢊꢆ
#( ꢊꢈ
#( ꢊꢌ ꢐ"ꢎ'
#( ꢌꢄ
#( ꢀꢆ
#( ꢊꢃ
#( ꢊꢉ
#( ꢊꢆ
#( ꢀꢉ
#( ꢆꢍ
ꢇ
%DIT
(Green)
(Blue)
02
ꢊꢀ
ꢊꢆ
ꢊꢈ
ꢊꢁ
ꢊꢉ
ꢊꢄ
ꢊꢌ
ꢊꢍ
ꢊꢃ
ꢀꢊ
)$
#(ꢎ##
#( ꢊꢆ
#( ꢊꢈ
#( ꢊꢌ
#( ꢌꢄ
#( ꢀꢆ
#( ꢊꢃ
#( ꢊꢉ
#( ꢊꢆ
#( ꢀꢉ
#( ꢆꢍ
" " # ! " #
! " # $ % &
or
From high From low
frequencies frequencies
2. Set
(Yellow)
(Blue)
• If you want to edit channel, read
the next column.
• Channel fine tunning ➡
• If the picture or sound is unnatural ➡
/
to select a system. (P. 16)
6
Picture setting
1. Display “Picture” menu
2. Select item or setting
• To enter an items menu
0ICTURE
ꢇ
1. Select
2. Enter
1. Select
1. Select
0ICTURE
ꢇ
0ICTURE -ODE
"ACKLIGHT
#ONTRAST
"RIGHTNESS
3HARPNESS
#OLOUR
"RIGHT
2. Adjust
3. Finish
2. Enter
4INT
7HITE "ALANCE
&EATURES
#OOL
ꢇ
You can select a preset picture setting according to your favour.
Bright : Hightens contrast and sharpness.
Game Mode : Adjusts picture setting when play the game.
Picture Mode
Soft
: Softens contrast and sharpness.
: Standardizes picture adjustment.
Standard
You can change the backlight brightness.
Darker Brighter
Backlight
Contrast
Brightness
Sharpness
Colour
You can change the contrast of the picture.
Lower Higher
You can change the brightness of the picture.
Darker Brighter
You can change the sharpness of the picture.
Softer Sharper
You can change the colour intensity of the picture.
Lighter Deeper
You can change the colour tint only in NTSC.
Reddish Greenish
Tint
You can change the white balance of the picture to better match the type of video being viewed.
Cool
Warm
Mid
: Bluish white colour.
: Reddish white colour.
: Normal white colour.
White Balance
7
Picture setting (continued)
Finer picture adjustment
ꢇ
&EATURES
#LEAR 3$
/FF
/FF
/FF
/FF
/FF
/FF
/FF
/FF
/FF
$IGITAL 6.2
$IGI0URE
0ULL $OWN
#OLOUR -ANAGEMENT
0ICTURE -ANAGEMENT
3MART 0ICTURE
$YNAMIC "ACKLIGHT
-0%' .OISE 2EDUCTION
#OLOUR 3YSTEM
:OOM
:
For clearly picture (Off / Mode-1 / Mode-2)
Clear SD
When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management
and MPEG Noise Reduction cannot be operated.
Digital VNR
DigiPure
:
:
:
:
:
:
Reduces the amount of noise in original picture. (Off / On)
For natural - looking outlines (Off / On)
For smooth cinema film (Auto / Off / On)
For natural - looking pictures (Off / On)
Pull Down
Features
Colour Management
Picture Management
Smart Picture
Fixs bright / dark pictures. (Off / On)
Makes it easier to view white areas (Off / On)
Dynamic Backlight
:
:
Reduces the brightness of the backlight when the screen is dark (Off / On)
Reduces MPEG video noise (Off / On)
MPEG Noise
Reduction
:
:
When there is no colour, change the colour system. (PAL / SECAM / NTSC 3.58 / NTSC 4.43 / AUTO)
Colour System
Zoom
When HD (720p,1080i or 1080p), PC signal is received, the
following zoom mode can be selected.
Changes the aspect ratio.
Zoom
mode
ꢇꢇ
:OOM
Panoramic
16 : 9
Regular/Slim
4 : 3
14:9 Zoom
14 : 9
Panoramic
Zoom
ꢇ
ꢇ
Full
Slim
Full Native
!UTO
0ANORAMIC
2EGULAR
signal
720p
0ANORAMIC
ꢀꢁꢂꢃ :OOM
ꢀꢄꢂꢃ :OOM
●
●
●
●
●
●
●
●
●
●
-
●
1080i
ꢀꢄꢂꢃ :OOM 3UBTITLE
&ULL
●
1080p
PC mode
● (Regular)
-
-
8
Sound setting
1. Display “Sound” menu.
2. Select item or setting
Sound
1. Select
2. Enter
1. Select
■
D <
I II Mono
Stereo/I II
3OUND
Sound Meister
Treble
Bass
Surround
Balance
Voice Enhancer
Al Volume
Off
2. Adjust
3. Finish
Off
Off
■
Stereo/I II
Selects the broadcast sound stereo, mono or bilingual language (u: Mono / m : Stereo / I : SUB1 / II : SUB2 / Mono)
Sound Meister
Treble
Sets sound theme to match your listening source (Off / Dynamic / Pure / Living)
Compensates high frequencies to widen the frequency band. (Weaker
Compensates low frequencies to widen the frequency band. (Weaker
Stronger)
Stronger)
Bass
Surround
Balance
Expands the stereo sound naturally. (Narrower
Wider)
Sets speaker balance (Left Stronger
Right Stronger) |